APC Smart-UPS VT 40kVA 400V – G35T40K3I4B4S
MGE Galaxy 3500 40kVA 400V 3:1 with 4 Battery Modules, Start-up 5X8 – G35T40K3I4B4S.
includes: Battery modules ship installed , Bolt down brackets , CD with software , Installation guide , Network Management Card , Power modules ship installed , Smart UPS signalling RS-232 cable , Start-Up Service , User Manual.
Galaxy 3500Features & Benefits
Sustainability
EU CoC for UPS
Ensures that UPSs sold in the EU are highly efficient
Total Cost of Ownership
Excellent footprint
Small UPS footprint provides maximum usage of valuable electrical room floorspace
Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Availability
Dual mains input
Increases availability by allowing the UPS to be connected to two separate power sources.
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.
Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Parallel-capacity capable
Increases total power capacity by using multiple uninterruptible power supplies simultaneously.
Advanced electrical features
Excellent power conditioning, very low harmonic distortion through IGBT rectifier, input power factor correction, and high power efficiency
Manageability
Environmental monitoring
Prevent equipment failure from a full range of threatening environmental conditions.
LCD graphics display
Text and mimic diagrams that display modes of operation, system parameters and alarms.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Built-in Web/SNMP management
Full-featured management via a Web browser as well as comprehensive management from a Network Management System.
Serviceability
Battery replacement without tools
Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
Multiple levels of service
With the option of packages or individual service components, our services are structured to allow you to pick and choose what you would like APC to do for you.
7×24 telephone technical support
Our experienced technical support engineers are available to answer your questions, giving you peace of mind knowing the help you need is there when you need it.
Front-access servicing
Simplifies installation and UPS maintenance while minimizing space requirements.
User-replaceable air filters
Enables quick and simple replacement of air filters.
Specifications APC Smart-UPS VT – G35T40K3I4B4S
Output
Output power capacity : 32.0 KWatts / 40.0 kVA
Max Configurable Power (Watts) : 32.0 KWatts / 40.0 kVA
Nominal Output Voltage : 230V
Output Voltage Note : Configurable for 220 : 230 or 240 nominal output voltage
Efficiency at Full Load : 95.4 %
Output Voltage Distortion : Less than 5%
Output Frequency (sync to mains) : 47 – 53 Hz for 50 Hz nominal
Output Frequency (not synced) : 50Hz +/- 0.1% for 50Hz nominal
Other Output Voltages : 220, 240
Load Crest Factor : Unlimited
Topology : Double Conversion Online
Waveform type : Sine wave
Overload Operation : 10 minutes @ 125% and 60 seconds @ 150%
Output Connections :
(1) Screw Terminals (Battery Backup)
(1) Hard Wire 3-wire (H N + G) (Battery Backup)
Output Voltage THD : < 2% for 0 to 100% linear load and < 5% for full non linear load
Output Voltage Tolerance : +/-1% static and +/- 5% at 100% load step
Bypass : Built-in Maintenance Bypass, Built-in Static Bypass
Input
Nominal Input Voltage : 400V 3PH
Input frequency : 40 – 70 Hz (auto sensing)
Input Connections : Hard Wire 5-wire (3PH + N + G)
Input voltage range for main operations : 304 – 477V
Input voltage adjustable range for mains operation : 340 – 460 (400V)V
Efficiency at Full Load : 95.4 %
Input Total Harmonic Distortion : Less than 5% for full load
Type of Input Protection Required : 3-pole breaker
Other Input Voltages : 380, 415
Maximum Input Current : 54.0A
Input Power Factor at Full Load : 0.98
Batteries & Runtime
Battery type
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Included Battery Modules : 4
Typical recharge time : 5hour(s)
Nominal Battery Voltage : +/-192 V (split battery referenced to neutral)
Expected Battery Life (years) : 3 – 5
Battery Volt-Amp-Hour Capacity : 9943
Extended Run Options : MGE-Galaxy-3500-40kVA-400V-3-1-with-4-Battery-Modules-Start-up-5X8
End of Discharge Battery Voltage : +/-154 V
Efficiency in Battery Operation : 94.9 %
Overload Operation : 10 minutes @ 125% and 60 seconds @ 150%
Runtime
View Runtime Graph
View Runtime Chart
Communications & Management
Interface Port(s) : DB-9 RS-232
Pre-Installed SmartSlot™ Cards : AP9631
Physical
Maximum Height : 1491mm , 149.1cm
Maximum Width : 523mm , 52.3cm
Maximum Depth : 838mm , 83.8cm
Net Weight : 656.0kg
Shipping weight : 686.0kg
Shipping Height : 1643mm , 164.3cm
Shipping Width : 650mm , 65.0cm
Shipping Depth : 1062mm , 106.2cm
Environmental
Operating Environment : 0 – 40 °C
Operating Relative Humidity : 0 – 95 %
Operating Elevation : 0-999.9meters
Storage Temperature : -50 – 40 °C
Storage Relative Humidity : 0 – 95 %
Storage Elevation : 0-15000meters
Audible noise at 1 meter from surface of unit : 55.0dBA
Online thermal dissipation : 4367.0BTU/hr
Protection Class : IP 51
Conformance
Approvals : CE, EN 50091-2, EN/IEC 62040-3, EN/IEC 62040-1-1, IEC 61000-3-2, IEC 61000-3-3, ISO 14001, ISO 9001, VFI-SS-111
Standard warranty : 1 year repair or replace
Kata Kunci Terkait :
APC Smart-UPS VT G35T40K3I4B4S, jual APC Smart-UPS VT G35T40K3I4B4S, harga APC Smart-UPS VT G35T40K3I4B4S, spesifikasi APC Smart-UPS VT G35T40K3I4B4S, beli APC Smart-UPS VT G35T40K3I4B4S
