Promo Harga Autocad LT 2017 - Menyambut Awal Tahun 2017
 Categories : UPS APC

 

APC Smart UPS VT – SUVTP20KH2B4S

gambar spesifikasi APC Smart UPS VT - SUVTP20KH2B4S

Smart-UPS VT

APC Smart-UPS VT 20kVA 400V w/2 Batt Mod Exp to 4, Start-Up 5X8, Int Maint Bypass, Parallel Capable

APC Smart-UPS VT,16 kW /20 kVA,Input 400V 3PH /Output 400V 3PH, Interface Port DB-9 RS-232, Smart-Slot, Extended runtime model

Includes: Battery modules ship installed, Bolt down brackets, CD with software, Installation guide, Network Management Card, Power modules ship installed, Start up included, User Manual

Features:

Availability

– Dual mains input: Increases availability by allowing the UPS to be connected to two separate power sources.
– Scalable runtime: Allows additional run time to be quickly added as needed.
– Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
– Generator compatible: Ensures clean, uninterrupted power to protected equipment when generator power is used.
– Automatic internal bypass: Supplies utility power to the connected loads in the event of a UPS overload condition or fault.
– Battery modules connected in parallel: Delivers higher availability through redundant batteries.

Serviceability

– User-replaceable batteries: Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
– Battery replacement without tools: Allows quick, easy battery replacement.
– Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
– Shippable with modules installed: Enables pre-installation UPS staging and testing and faster installation.
– Modular design: Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable       modules.

Manageability

– Network manageable: Provides remote management of the UPS over the network.
– InfraStruXure Manager Compatible: Enables centralized management via the APC InfraStruXure Manager.
– LCD display: Alpha-Numeric Display which displays system parameters and alarms.
– Audible alarms: Provides notification of changing utility power and UPS conditions.
– Programmable frequency: Ensures compatibility with different input frequencies.
– LED status indicators: Quickly understand unit and power status with visual indicators.
– SmartSlot: Customize UPS capabilities with management cards.

Total Cost of Ownership

Input power factor correction: Minimizes installation costs by enabling the use of smaller generators and cabling.
– Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature.
– Manual maintenance bypass: Reduces installation costs by eliminating the need for an external mechanical bypass.
– Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.

Protection

– Frequency and voltage regulation: Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
– Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
– Cold-start capable: Provides temporary battery power when the utility power is out.

 

Specifications APC Smart UPS VT – SUVTP20KH2B4S

Product Code

SUVTP20KH2B4S

OUTPUT

Output Power Capacity

16 kW / 20 kVA

Max Configurable Power

16 kW / 20 kVA

Nominal Output Voltage

400V 3PH

Output Voltage Note

Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage

Efficiency at Full Load

0.95

Output Voltage Distortion

Less than 5% at full load

Output Frequency (sync to mains)

47 – 53 Hz for 50 Hz nominal

Crest
Factor

Unlimited

Waveform Type

Sine wave

Output Connections

(1) Hard Wire 4-wire (3PH + G)

(1) Hard Wire 5-wire (3PH + N + G)

(1) Screw Terminals

Bypass

Built-in Maintenance Bypass, Built-in Static Bypass

INPUT

Nominal Input Voltage

400V 3PH

Input Frequency

40 – 70 Hz (auto sensing)

Input Connections

Hard Wire 5-wire (3PH + N + G)

Input voltage range for main operations

304 – 477V

Other Input Voltages

380415

Maximum Input Current

27A

Input Breaker Capacity

50.0 A

Batteries & Runtime

Battery Type

VRLA

Included Battery Modules

2

Available Battery Slots

2

Typical recharge time

4 hour(s)

RBC Quantity

2

Nominal Battery Voltage

+/-192 V (split battery referenced to neutral)

End of Discharge Battery Voltage

+/-154 V

Extended Run Options

APC Smart-UPS VT 20kVA 400V w/2 Batt Mod Exp to 4, Start-Up 5X8, Int Maint Bypass, Parallel Capable

Communications & Management

Interface Port(s)

DB-9 RS-232, Smart-Slot

Pre-Installed SmartSlot Cards

AP9631

Control panel

Multi-function LCD status and control console

Audible Alarm

Audible and visible alarms prioritized by severity

Emergency Power Off (EPO)

Yes

Physical

Maximum Height

1499.00 mm

Maximum Width

559.00 mm

Maximum Depth

813.00 mm

Net Weight

415.00 KG

Shipping Weight

445.91 KG

Shipping Height

1643.00 mm

Shipping Width

650.00 mm

Shipping Depth

1062.00 mm

Color

Black

Units per Pallet

1

Environmental

Operating Environment

0 – 40 °C

Operating Relative Humidity

0 – 95%

Operating Elevation

0-999.9 meters

Storage Temperature

-50 – 40 °C

Storage Relative Humidity

0 – 95%

Storage Elevation

0-15000 meters

Audible noise at 1 meter from surface of unit

64.00 dBA

Online Thermal Dissipation

3112.00 BTU/hr

Protection Class

IP 20

 

Kata Kunci Terkait :

apc suvtp20kh2b4s, apc ups suvtp20kh2b4s, suvtp20kh2b4s, suvtp20kh2b4s pdf, suvtp20kh2b4s specifications, suvtp20kh2b4s datasheet, suvtp20kh2b4s price, suvtp20kh2b4s apc