APC SMC1500I
Smart-UPS
APC Smart-UPS C 1500VA LCD 230V
APC Smart-UPS,900 Watts /1500 VA,Input 230V /Output 230V, Interface Port USB
Includes: CD with software, Documentation CD, USB cable
Key Features
- Green mode – excellent operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection
- Pure sine wave output on battery – simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics
- LCD status display – provides key UPS status at a glance, multiple status indicators with load and battery bar graphs
- High online efficiency – reduces utility costs, generates less heat
- Cold-start capable – provides temporary battery power when the utility power is out
- Temperature-compensated battery charging – prolongs battery life by regulating the charge voltage according to battery temperature
- Intelligent battery management – maximizes battery performance, life, and reliability through intelligent, precision charging
- Power conditioning – protects connected loads from surges, spikes, lightning, and other power disturbances
- Temperature-compensated battery charging – prolongs battery life by regulating the charge voltage according to battery temperature
- Automatic restart of loads after UPS shutdown – automatically starts up the connected equipment upon the return of utility power
- Disconnected battery notification – warns when a battery is not available to provide backup power
- Network manageable – provides remote power management of the UPS over the network
- Audible alarms – actively let you know if the unit is on battery, if the battery is low or if there is an overload condition
- LED status indicators – quickly understand unit and power status with visual indicators
- Serial connectivity – provides management of the UPS via a serial port
- USB connectivity – provides management of the UPS via a USB port
- Disconnected battery notification – warns when a battery is not available to provide backup power
- Hot-swappable batteries – ensures clean, uninterrupted power to protected equipment while batteries are being replaced
- Predictive failure notification – provides early-warning fault analysis ensuring proactive component replacement
- Resettable circuit breakers – enables a quick recovery from overload events
- Battery failure notification – provides early-warning fault analysis on batteries enabling timely preventive maintenance
- Adjustable voltage-transfer points – maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation
- Adjustable voltage sensitivity – provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications
- Safety-agency approved – ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment
Specifications APC SMC1500I
Form Factor |
Tower |
Daya Keluar |
1500VA / 900W |
Voltase Masuk |
Nominal Input Voltage : 230V Input Frequency : 50/60 Hz +/- 3 Hz (auto sensing) Input Connections : IEC-320 C14 Input voltage range for main operations : 180 – 287V |
Voltase Keluar |
230V Waveform Type : Sine wave |
Surge Energy Rating |
459 Joules Filtering : Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449 |
Antarmuka / Interface |
Interface Port USB |
Baterai |
Battery Type : Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof Typical recharge time : 3 hour(s) RBC™ Quantity : 1 Replacement Battery : RBC6 |
Dimensi |
171 x 219 x 439 mm (WxHxD) |
Berat |
24.09 kg |