APC Smart-UPS RT 2000VA 230V
APC Smart-UPS On-Line,1400 Watts /2000 VA,Input 230V /Output 230V, Interface Port DB-9 RS-232, SmartSlot, Extended runtime model, Rack Height 2 U
Includes: CD with software, Smart UPS signalling RS-232 cable, User Manua
Smart-UPS On-Line Features & Benefits :
Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Allows additional run time to be quickly added as needed.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Provides remote power management of the UPS over the network.
InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.
Customize UPS capabilities with management cards.
LED status indicators
Quickly understand unit and power status with visual indicators.
Provides management of the UPS via a serial port.
Plug-and-Play external batteries
Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Flash upgradeable firmware
Install maintenance releases of firmware remotely using FTP.
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Predicitive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Provides notification of changing utility power and UPS power conditions
Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Protects connected loads from surges, spikes, lightning, and other power disturbances.
Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
Ensures clean, uninterrupted power to protected equipment when generator power is used.
Provides temporary battery power when the utility power is out.
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
2000VA / 1400W
Nominal Input Voltage 230V
Input Frequency 50/60 Hz +/- 5 Hz (auto sensing)
Input Connections (IEC-320 C20)
Waveform Type : Sine wave
Surge Energy Rating
Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449
Antarmuka / Interface
1x Serial RS-232 (DB-9) Port
Battery Type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Included Battery Modules 1
Typical recharge time 4 hour(s)
Replacement Battery RBC31
Internal Battery : 16.1 Minutes
Internal Battery + 1 SURT48XLBP : 71.3 Minutes
Internal Battery + 2 SURT48XLBP : 133.7 Minutes
Internal Battery + 3 SURT48XLBP : 200.6 Minutes
Internal Battery + 4 SURT48XLBP : 270.9 Minutes
Internal Battery : 4.9 Minutes
Internal Battery + 1 SURT48XLBP : 31 Minutes
Internal Battery + 2 SURT48XLBP : 60.4 Minutes
Internal Battery + 3 SURT48XLBP : 92 Minutes
Internal Battery + 4 SURT48XLBP :125.2 Minutes
(85 x 432 x 483 mm) WHD
APC PowerChute Smart-UPS Bundle
Optional Rail Kit