Epson LQ-2180 Impact dot matrix Printer
Print :
Printing Method: 24-pin, (12 x 2 staggered), impact dot matrix
Print Direction: Bi-directional with logic seeking
Print Speed:
- High Speed Draft: 480 cps at 10 cpi
- Draft: 360 cps at 10 cpi
- Letter Quality: 120 cps at 10 cpi
Paper Handling :
Cut Sheets:
- Single sheet or multipart
- Width: 3.9 to 16.5″
- Length: Max 16.5″
- Cut sheet multipart forms thickness: 0.0047 to 0.018″ (0.12 to 0.46 mm)
Cards:
- Width: 3.9 to 7.8″
- Length: Max 7.8″
- Thickness: 0.0087″ (0.22 mm)
Envelopes: No. 6, No. 10
Continuous:
- Single sheet, multipart or labels
- Width: 4″ to 16″
- Length: Max 22″
Continuous paper multipart forms thickness 0.0025-0.018″(0.065-0.46mm)
Paper Feed Mechanism:
- Friction feed (front / rear)
- Push tractor feed (front / rear)
- Push/pull tractor feed (front / rear)
- Pull tractor feed (front / rear / bottom)
Paper Path:
- Cut sheet: Front / rear entry
- Continuous paper: Front/rear/bottom entry
General :
Printer Language : ESC / P2 and IBM 2391 Plus (IBM® ProPrinter compatible)
Interface: Standard Bidirectional parallel interface (IEEE-P1284 Nibble Mode supported)
Input Buffer : 64 KB or 0KB (user selectable)
Control Panel:
- Buttons: Operate, Pause, Load/Eject, LF / FF, Tear Off / Bin, Font, Pitch selection
- Indicators: Pause, Paper Out, Micro Adjust, Tear Off / Bin selection, Pitch selection, Font selection
Sound Level : Approx. 54 dB(A) (ISO 7779 pattern)
Rated voltage : 120V AC ±10%
Rated frequency range : 50 – 60Hz
Dimensions : 10.11″ x 15.82″ x 25.16″ (W x D x H)
Weight : Approx. 28.7 lb
Temperature: 41° to 95° F (5° to 35° C)
Humidity: 10 – 80% RH