HPE 3PAR StoreServ 8000 Storage
HPE 3PAR StoreServ 8000 Storage (HPE 3PAR StoreServ 8200, 8400, 8440, and 8450 Storage) offers enterprise Tier 1 storage at a midrange price. HPE 3PAR StoreServ 8000 Storage delivers the performance advantages of a purpose-built, flash-optimized architecture without compromising resiliency, efficiency, or data mobility. The new HPE 3PAR Gen5 Thin Express ASIC provides silicon-based hardware acceleration of thin technologies, including inline deduplication, to reduce acquisition and operational costs by up to 75 percent without compromising performance.
With unmatched versatility, performance, and density, HPE 3PAR StoreServ 8000 Storage gives [CustomerName] a range of options that support true convergence of block and file protocols, all-flash array performance, and the use of spinning media to further optimize costs.
HPE 3PAR StoreServ 8000 Storage
Features
Lower your cost of storage by up to 75 percent:
- Benefit from an all-flash architecture as low as $1.50 USD per GB usable with a five-year warranty on all SSDs.
- Cut capacity requirements by up to 75 percent with data compaction technologies.
- Simplify storage management and reduce your footprint by up to 67 percent with unified block and file.
- Get industry-leading density of 5.5 PB per floor tile.
Deliver performance without compromise:
- Remove bottlenecks with a flash-optimized, scale-out architecture delivering over one million IOPS.
- Protect service levels with Quality of Service (QoS) optimization and consistent, sub-millisecond latency.
- Support mixed workloads and accelerate performance with the Gen5 Thin Express ASIC.
- Boost flash performance by up to 35 percent and reduce latency by up to 2.5 times with 16 Gb/s Fibre Channel.
Avoid downtime and consolidate with confidence:
- Maintain high availability and Tier-1 resiliency with a complete set of persistent technologies.
- Achieve near-synchronous RPOs with flexible, transparent, and model-agnostic remote replication.
- Simplify backup and restores with application-aware, storage-integrated data protection.
Respond effortlessly to unpredictable and changing demands:
- Grow with freedom in any direction, from as little as 3.6 TB to 7.3 PB usable in a single system.
- Remove complexity with iSCSI for Ethernet and speed configuration with automated storage networking.
- Modernize your EMC® and Hitachi Data Systems storage infrastructure with painless, no-cost data migration.
- Optimize storage at the data center level with seamless data movement between arrays.
Product Details
HPE 3PAR StoreServ 8200, 8400, 8440, and 8450 Storage Details
| HPE 3PAR StoreServ 8200 |
HPE 3PAR StoreServ 8400 |
HPE 3PAR StoreServ 8440 |
HPE 3PAR StoreServ 8450 |
|
| Number of Controller Nodes | 2 | 2 or 4 | ||
| HPE 3PAR Gen5 ASICs | 2 | 2 or 4 | ||
| Processors | 2 x 6-core 2.2 GHz | 2 – 4 x 6-core 2.2 GHz |
2 – 4 x 10-core 2.4 GHz |
|
| Total Cache | 832 GiB | 1664 GiB | 8384 GiB | 384 GiB |
|
768 GiB | 1536 GiB | 8000 GiB | Not applicable |
|
64 GiB | 128 GiB | 384 GiB | |
| Total Cache Per Node Pair | 832 GiB | 4192 GiB | 192 GiB | |
|
768 GiB | 4000 GiB | Not applicable | |
|
64 GiB | 192 GiB | ||
| Maximum Host Ports | 12 ports | 24 ports | ||
|
4 – 12 ports | 4 – 24 ports | ||
|
0 – 4 ports | 0 – 8 ports | ||
|
0 – 4 ports | 0 – 8 ports | ||
|
0 – 8 ports | 0 – 16 ports | ||
|
0 – 4 ports | 0 – 8 ports | ||
| Maximum Initiators Supported | 2048 | 4096 | ||
| Built-in 1 GbE Ports1 | 2 ports | 2 – 4 ports | ||
| 2U Controller Node Drive Capacity | 24 ports | |||
| Number of Hard Disk Drives2 | 6 – 240 | 6 – 576 | 6 – 960 | Not applicable |
| Number of Solid State Drives | 6 – 120 | 6 – 240 | 6 – 480 | |
| Maximum Raw Capacity (approximate)3 | 750 TiB4 | 2400 TiB | 3000 TiB | 1843 TiB |
| Usable File Capacity5 | 2 – 128 TiB | 2 – 256 TiB | 2 – 256 TiB | 2 – 256 TiB |
Capacity Details
| HPE 3PAR StoreServ 8200 |
HPE 3PAR StoreServ 8400 |
HPE 3PAR StoreServ 8440 |
HPE 3PAR StoreServ 8450 |
|
| RAID Levels | RAID 0, 1, 5, 6 | |||
| RAID 5 Data to Parity Ratios | 2:1 – 8:1 | |||
| RAID 6 Data to Parity Ratios | 4:2, 6:2, 8:2, 10:2, 14:2 | |||
| Drive Capacities (SSDs) 6 | 400 SSD, 480 SSD, 920 SSD, 480 nonAFC SSD, 1.92 TB SSD, 3.84 TB SSD, 7.68 TB SSD, 15.36 TB SSD | |||
| Drive Capacities (HDD) | 300 15K SAS7, 600 15K SAS
600 10K SAS, 1200 10K SAS, 1800 10K SAS 2000 7.2K NL8, 4000 7.2K NL, 6000 7.2K NL, 8000 7.2K NL |
Not applicable | ||
| Number of Add-on Drive Enclosures9 | 0 – 9 enclosures |
0 – 22 enclosures | 0 – 38 enclosures | 0 – 18 enclosures |
Notes:
1 Two built-in 1 GbE ports per node pair can be used either for Remote Copy (RCIP) or for HPE 3PAR File Persona Software.
2 Not applicable to the HPE 3PAR StoreServ 8200 All-Flash Starter Kit and HPE 3PAR StoreServ 8400 All-Flash Starter Kit.
3 Maximum raw capacity currently supported with any and all drive types. The minimum supported raw capacity is equal to eight times the minimum available drive size.
4 For storage capacity, 1 GiB = 230 bytes and 1 TiB = 1,024 GiB.
5 Usable file capacity supported for the HPE 3PAR File Persona Software Suite.
6 SSDs are Solid State Drives.
7 SAS drives are Serial Access SCSI drives.
8 NL drives are Nearline (7200 RPM) Enterprise SAS drives.
9 Each drive enclosure holds up to 24 drives in 2U for small form factor (2.5 inch) drives and 4U for large form factor (3.5 inch) drives.
Specifications are subject to change without notice.
