021-612 3131 / 0812 9726 3131 cs@platinum-computer.com
Select Page

UPS APC BR900GI

Line-Interactive, UPS Pro 900VA / 540W, 230V, UPS with AVR, Single-Phase, Tower, USB

gambar APC BR900GI

APC Power-Saving Back-UPS Pro 900, 230V
Includes: CD with software , Qty 1- Detachable IEC Power Cord , USB cable , User Manual , Warranty card.

APC Power-Saving Back-UPS Pro 900, 230V
– Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
– Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
– Audible alarms
Provides notification of changing utility power and UPS power conditions
– Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
– Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
– Battery replacement without tools
Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
– Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
– Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
– Cold-start capable
Provides temporary battery power when the utility power is out.
– Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.
– Disconnected battery notification
Warns when a battery is not available to provide backup power.
– Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
– Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
– Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
– LCD graphics display
Text and mimic diagrams that display modes of operation, system parameters and alarms.
– Power-saving outlets
Automatically cuts power to idle equipment to conserve electricity.
– Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.
– Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
– Serial connectivity
Provides management of the UPS via a serial port.
– Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
– USB connectivity
Provides management of the UPS via a USB port (not available on all models).
– User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Back-UPS ProFeatures & Benefits
Protection
– Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.
– Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
– Surge only outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.

Availability
– Customizable voltage-transfer points
Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics.
– Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
– Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
– Customizable voltage sensitivity
Toggle between pre-determined voltage-transfer points depending on your power quality (high, medium or low sensitivity), maximizing useful battery life and protecting sensitive electronics.
– Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
– Cold-start capable
Provides temporary battery power when the utility power is out.
– Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
– Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
– Energy Management Function
Energy saving feature automatically power off peripherals when the a master device, usually a PC, hibernates or is shut down. Power to peripherals is immediately restored when the master device wakes up or is switched on.
– Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

Safety
– Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Marketing Features
– Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
– Energy Management Function
Energy saving feature automatically power off peripherals when the a master device, usually a PC, hibernates or is shut down. Power to peripherals is immediately restored when the master device wakes up or is switched on.
– LCD Status Display
Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
– Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
– Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment

Serviceability
– Simple battery replacement
Increases UPS availability by allowing quick, easy battery replacement.
– Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.

Manageability
– USB connection
Use your PC to access additional power protection and management features for your UPS via a USB Port.
– Disconnected battery notification
Warns when a battery is not available to provide backup power.
– Audible alarms
Provides notification of changing utility power and UPS power conditions
– LCD Status Display
Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.

Spesifikasi UPS APC BR900GI

Form Factor

Tower

Daya Keluar

900VA / 540W

Voltase Masuk

Input Connections : IEC-320 C14

Nominal Input Voltage : 230V

Input Voltage range for main operations : 176 – 294V

Input Voltage adjustable range for mains operation : 156 – 300V

Voltase Keluar

230V

Waveform Type : Stepped approximation to a sinewave

Surge Energy Rating

613 Joules

Full time multi-pole noise filtering : 5% IEEE surge let-through : zero clamping response time : meets UL 1449

Dataline Protection

Analog phone line for phone/fax/modem/DSL (RJ-11 connector),Network line –
10/100/1000 Base-T Ethernet (RJ-45 connector)

Back-Up Time Half Load

16.3 Minutes

Back-Up Time Full Load

4.6 Minutes

Antarmuka / Interface

DB-9 RS-232, USB

Baterai

Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof

Typical recharge time : 8 hour(s)

Dimensi

100 x 250 x 382 mm (WxHxD)

Berat

10.72 kg

 

Kata Kunci Terkait:
UPS APC, BR900GI, spesifikasi UPS APC BR900GI, jual UPS APC BR900GI, beli UPS APC BR900GI, harga APC BR900GI

×

Platinum-Computer.Com

× Hubungi Kami