021-612 3131 / 0812 9726 3131 cs@platinum-computer.com
Select Page

APC Smart-UPS RC 1000VA 230V – SRC1000I

gambar APC Smart-UPS RC 1000VA 230V - SRC1000I

UPS APC SRC1000I

SRC1000I Features
APC Smart-UPS RC 1000VA 230V
High density, double-conversion on-line power protection with scalable runtime
Includes: CD with software , Smart UPS signalling RS-232 cable , User Manual

SmartSlot
Customize UPS capabilities with management cards.

Smart-UPS On-Line Features & Benefits
Adaptability
Rack/Tower convertible
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Flash upgradeable firmware
Install maintenance releases of firmware remotely using FTP.
Plug-and-Play external batteries
Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.

Manageability
Serial connectivity
Provides management of the UPS via a serial port.
LED status indicators
Quickly understand unit and power status with visual indicators.
Network manageable
Provides remote power management of the UPS over the network.
SmartSlot
Customize UPS capabilities with management cards.
InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.

Protection
Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.
Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.
Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.
Cold-start capable
Provides temporary battery power when the utility power is out.
Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.

Serviceability
Audible alarms
Provides notification of changing utility power and UPS power conditions
User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Predicitive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Disconnected battery notification
Warns when a battery is not available to provide backup power.

Marketing Features
Low operating and maintenance costs with proven reliability and intelligent battery management.
Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.
Save time with easy and convenient remote accessibility.
Network manageable via serial, USB or optional Ethernet. Includes Powerchute® Network Shutdown Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.
Peace of mind that comes with full equipment compatibility and reliability of a leader
Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.
Avoids costly power problems by keeping your IT equipment and data protected and available.
Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.

Availability
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Scalable runtime
Allows additional run time to be quickly added as needed.
Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.

Specifications APC Smart-UPS RC 1000VA 230V – SRC1000I

Output

Bypass

Built-in Bypass

Load Crest Factor

3 : 1

Output Voltage Distortion

Less than 2%

Efficiency at Full Load

88.0 %

Output Frequency (sync to mains)

50/60Hz +/- 3 Hz

Output Connections

(4) IEC 320 C13 (Battery Backup)

Other Output Voltages

220, 240

Max Configurable Power (Watts)

800 Watts / 1.0 kVA

Output power capacity

800 Watts / 1.0 kVA

Topology

Double Conversion Online

Output Voltage Note

Configurable for 220 : 230 or 240 nominal output voltage

Waveform type

Sine wave

Transfer Time

4ms typical

Input

Cord Length

1.22 meters

Number of Power Cords

1

Efficiency at Full Load

88.0 %

Input frequency

47 – 63 Hz

Input voltage adjustable range for mains operation

100 – 280 V

Input voltage range for main operations

160 – 280 V

Input Breaker Capacity

0 A

Other Input Voltages

220, 240

Input Connections

IEC-320 C20

Rack Height

4 U

Battery

Battery Slots Empty

1

Included Battery Modules

1

Typical recharge time

3 hour(s)

Battery type

Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof

Battery Volt-Amp-Hour Capacity

259

Communication

Audible Alarm

Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

Control panel

LED status display with load and battery bar-graphs and On Line : On Battery : Replace Battery : Overload and Bypass Indicators

Emergency Power Off (EPO)

Yes

Interface Port(s)

DB-9 RS-232, SmartSlot

Available SmartSlotâ„¢ Interface Quantity

1

Runtime

Output power capacity

800 Watts / 1.0 kVA

Surge

Data Line Protection

RJ-45 Modem/Fax protection (four wire dual line)

Filtering

Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449

Physical

Color

Black

Maximum Depth

420 mm , 42.0 CM

Maximum Height

257 mm , 25.7 CM

Net Weight

14.82 KG

Units per Pallet

12.0

Rack Height

4 U

Shipping Depth

556 mm , 55.6 CM

Shipping Height

384 mm , 38.4 CM

Shipping weight

16.62 KG

Shipping Width

288 mm , 28.8 CM

Maximum Width

166 mm , 16.6 CM

Environmental

Audible noise at 1 meter from surface of unit

50.0 dBA

Operating Temperature

0 – 40 °C

Operating Elevation

0-3000 meters

Operating Relative Humidity

0 – 95 %

Storage Temperature

-20 – 50 °C

Storage Elevation

0-15000 meters

Storage Relative Humidity

0 – 95 %

Online thermal dissipation

652.0 BTU/hr

Conformance

Approvals

EN 60950, EN/IEC 60950-1, EN/IEC 62040-1, EN/IEC 62040-2

Standard warranty

2 years repair or replace, optional on-site warranties available, optional extended warranties available

Sustainable Offer Status

RoHS

Compliant

REACH

REACH: Contains No SVHCs

Kata Kunci Terkait :

APC Smart-UPS RC 1000VA 230V, SRC1000I, jual ups APC SRC1000I, harga ups APC SRC1000I, spesifikasi ups APC SRC1000I, beli ups APC SRC1000I

×

Platinum-Computer.Com

× Hubungi Kami