Projector PANASONIC PT-LX30H
Auto Input Signal Search : The Auto Input Signal Search function automatically detects the input signal and selects the input channel based on the signal. This function lets you start a presentation without any complicated setup required
Real-Time Keystone Correction : With Real-Time Keystone Correction, the projector automatically senses if you adjust its angle (in the vertical direction) during operation and instantly makes whatever Keystone Correction is necessary for optimal viewing.
Color-board and Blackboard modes : Color-board and Blackboard modes adjust the colors to provide high-quality projection possible in rooms that don’t have a screen.
Easy Remote Monitoring and Control over a LAN (PT-LW25H/LX30H/LX26H): A web browser on a computer connected through a wired LAN system lets you remotely operate projectors and check their status. An e-mail messaging function can also notify you when a lamp needs replacement, and indicate the overall projector status.
In addition, Multi Projector Monitoring and Control Software is available for monitoring and controlling multiple Panasonic projectors from a single PC.
The wired LAN terminal is compatible with PJLink (class1), an open protocol that is used by many manufacturers, to enable integrated control of systems that contain different brands of projectors.
Direct Power Off : The cooling fan continues to operate even when the main power switch is turned off after projection is finished. This also allows the power to be turned off by directly switching off the room’s main breaker for systems, such as ceiling mounted systems, where the main power switch cannot be reached.
Specifications Projector PANASONIC PT-LX30H
Sistem Projector |
LCD Technology |
Resolusi Native |
XGA (1024 x 768) |
Brightness |
3000 Lumens ANSI |
Rasio Kontras |
2500:1 |
Rasio Besaran (Zoom) |
Manual focus, F 2.10–2.25, f 19.11-22.94 mm |
Ukuran Gambar |
1.2x manual zoom |
Input |
230 W × 1, lamp replacement cycle (lamp power: High, Normal/Eco): 3,000 hours/4,000 hours |
Output |
Computer IN 1/S-VIDEO IN : D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR/S-VIDEO x 1) (The D-Sub/S-VIDEO conversion cable ET-ADSV is required for inputting S-VIDEO signals.) Video In : RCA pin × 1 (Composite Video) Audio On : RCA pin x 2 (L-R x 1) for VIDEO input Computer Audio In : M3 × 1 (L-R x 1) Serial In : D-sub 9-pin (male) × 1 for external control (RS-232C compliant) LAN : RJ-45 × 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™ (class 1)) |
Speaker |
Computer IN 2/Monitor Out : D-sub HD 15-pin (female) x 1 (RGB×1), (input/output selectable using on-screen menu) (When Monitor Out is selected, the Computer IN 1 signal is output.) |
Remote Control |
3.2 cm round shape × 1, output power: 1 W (monaural) |
Lain-lain |
297 W (0.47 W in Eco standby mode*1, 8.6 W in Network standby mode.) |