021-612 3131 / 0812 9726 3131 cs@platinum-computer.com
Select Page

Gambar PRO53310-QRS 10KVA

UPS PROLINK Sorra (3P/1P & 3P/3P) – Rack/Tower

Prolink Sorra Rack/Tower Series- P.F 1.0 UPS systems is designed based on true online double conversion to effectively insulate against network
disturbances and enable higher load up time. DSP technology guarantees high reliability A Digital Signal Processor (DSP) technology digitizes the
data and mathematically manipulates them to provide an improved solution with higher performance. Frequency converter mode 50Hz/60Hz is also
available for sensitive equipment. Some distinct features of the Prolink Sorra series are as listed below.

– TRUE DOUBLE-CONVERSION
– MODULAR CONNECTOR BOX WITH HOT-SWAPPABLE DESIGN FOR EASE OF POWER EXPANSION, INSTALLATION AND MAINTENANCE
– STANDARD 19” FORM FACTOR WITH TOWER/RACK CONVERTIBLE DESIGN
– PARALLEL OPERATION UP TO 10 UPS MODULES WITH COMMON BATTERY
– ADJUSTABLE BATTERY DESIGN
– DSP TECHNOLOGY GUARANTEES HIGH RELIABILITY

Key Features PRO53310-QRS 10KVA

Standard 19” form factor with tower/rack convertible design
Designed for easy adjustment, the vertical/horizontal conversion
design enhances the flexibility and scalability of the modular UPS.
19″ form factor suits for the standard rack so it optimizes cost
expense to meet the power demands.

Modular hot-swapping design
SORRA Series is applied with patented modular hot-swapping design
to enhance the flexibility of power expansion and maintenance

Parallel operation with common battery
Compared to general parallel system, multiple Sorra series UPS
Modules can form a parallel power backup system by sharing
common battery packs which might greatly reduce the expense
and reach the same performance.

Adjustable battery number design
The number of connected batteries can be adjusted flexibly
based on different power demands. External standalone type
battery banks can be connected for longer backup requirements.

ECO mode operation for energy saving
ECO mode improves the effciency up to 97% to cut
energy usage & cost. In this mode, loads are
supplied by the mains directly. While mains failure,
the UPS will constantly supply the power to the
connected device without any interruption.

Emergency Power Off (EPO) function
Emergency Power Off (EPO) function is also available for the UPS models and which is used to
protect the personnel and the equipment in case of
fire outbreak or other types of emergency.

Generator compatible
This UPS can accept generator as power source and
still convert perfect power to the connected loads.

This UPS can accept generator as power source and
still convert perfect power to the connected loads.

17U Cabinet System
This customized system will be using embedded 1U centralized
communication unit

SPECIFICATIONS PRO53310-QRS 10KVA

GENERAL
– UPS Type: Tower
– Phase : 3 phase in / 3 phase out
– Rating (VA) : 10KVA
– Nominal Power (W) : 10KW
– Dimension (mm) : 615 x 418 x 132 [3U] (D x W x H)
– Weight (kgs) : 22

INPUT
– Connection Type : Terminal
– Nominal Voltage : 3 x 360VAC / 380VAC / 400VAC / 415VAC (3Ph+N+PE)
– Voltage Range : 190-520 VAC (3-phase) @ 50% load 305-478 VAC (3-phase) @ 100% load
– Frequency Range : 40 Hz ~ 70 Hz
– Power Factor : ≧ 0.99 @ 100% load
– THDi : < 4% @ full linear load

OUTPUT
– Connection Type : Terminal
– Output Voltage : 360VAC / 380VAC / 400VAC / 415VAC (3Ph+N)
– Voltage Regulation : ±1%
– Frequency Range (Synchronized Range) : 46~54Hz or 56~64Hz
– Frequency Range (Batt. Mode) : 50 Hz ± 0.1 Hz or 60Hz ± 0.1 Hz
– Current Crest Ratio : 3:1
– Harmonic Distortion : ≦2% THD (Linear load) ≦3% THD (Non-linear load)

EFFICIENCY & INDICATORS
– AC Mode : 94%
– ECO Mode : 97%
– At Full Load : 91%
– Peak : 92%
– LCD : UPS status, Load level, Battery level, Input/Output voltage, Discharge timer, and Fault conditions

CONNECTIVITY, CONTROL & MONITORING
– Front panel : Status LED, Function keys, LCD display
– Communication : Smart RS232* USB Port Emergency Power Off (EPO)

BATTERY
– Battery Voltage : ± 12V / 9 Ah
– Numbers : 16 ~ 20 pcs (adjustable) x 2
– Typical Recharge Time : 9 hours recover to 90% capacity
– Charging Current : ± 4A

 

×

Platinum-Computer.Com

× Hubungi Kami