APC Galaxy VS UPS 80kW 400V
SKU: GVSUPS80KHS
APC Galaxy VS UPS 80kW 400V for External Batteries, Start-up 5×8
Highly efficient, easy-to-deploy 20kW, 400V 3-phase uninterruptible power supply (UPS) that brings best-in-class power protection to edge, small and medium data centers, as well as to critical infrastructure in commercial and industrial applications. Compact design, high-density technology and modular architecture keep total cost of ownership low and operational efficiency at the highest levels. Galaxy VS reduces your energy losses by up to 66% with the patented ECOnversion mode – reaching up to 99% efficiency levels and delivering more energy savings than even our industry-leading 97% efficiency in normal operating mode. The UPS is EcoStruxure-ready to give you peace of mind with cloud-based remote monitoring and management via your smartphone. Includes 5×8 start-up service. For battery runtime details, see the runtime charts published under the Documents tab.
Includes: Dust filter, Installation guide, Integrated network management, Power modules ship installed, Start-up service, Top and bottom cable entry
Key Features GVSUPS20KHS :
-Run time for load Min-max: 2000-20000 W 20000 W —
-Max. Capacity Used : 100%
-Output power capacity : 20.0kWatts / 20.0kVA
-Output Connections : (1) Hard wire 5-wire (3P + N + E) (Battery Backup)
-Nominal Output Voltage : 400V 3PH
-Nominal Input Voltage ” 400V 3PH
-Input Connections : Hard wire 4-wire (3P + N + E), Hard wire 5-wire (3P + N + E)
-Maximum Input Current : 37.0A
Galaxy VS Features & Benefits
“Total cost of Ownership”
Compact UPS :
High-density technology and full front access make this UPS a footprint saver well suited for confined spaces.
Compatible with Galaxy Lithium-ion Battery Cabinets :
Reduces system footprint and weight, cooling and maintenance requirements, and total cost of ownership; offers double the life of VRLA batteries; and improves backup storage predictability and manageability. Galaxy VS UPSs for external batteries are compatible with Galaxy Lithium-ion Battery Cabinets.
ECOnversion mode ;
Operating mode that ensures ultra high efficiency while charging the batteries, conditioning the load power factor and ensuring a Class 1 output voltage regulation.
High efficiency in double conversion mode :
Consistently high power quality at high efficiency, even at low load levels. Any disturbances on the distribution waveform are regenerated via the zero transfer time AC to DC then DC to AC conversion process. The battery is only used as a back-up source.
Input power factor correction :
Minimizes installation costs by enabling the use of smaller generators and cabling.
Robust operation :
No power derating in kW up to 40°C or 104°F.
Wide input voltage range :
Designed for harsh electrical environments to save battery life.
“Serviceability”
EcoStruxure IT Expert :
From your smartphone or computer, connect to our cloud-based, do-it-yourself monitoring system that collects, organizes, and distributes critical alerts and key information in real time, providing a unified view of even highly distributed physical infrastructure environments. Optimize your uptime and maintenance planning, and anticipate infrastructure issues before they occur with advanced analytics and performance benchmarking. Available in select countries. To learn more, visit a target=”_blank” href=”http://www.ecostruxureit.com”ecostruxureit.com/a.
Multiple levels of service offers :
With the option of packages or individual service components, our services are structured to allow you to pick and choose what you would like Schneider Electric to do for you.
Front-access servicing :
Simplifies installation and UPS maintenance while minimizing space requirements.
Modular UPS design :
Provides design redundancy and fast serviceability with improved mean time to repair, via self-diagnosing, field-replaceable modules.
“Availability”
Built-in backfeed protection :
Full built-in backfeed contactor ensures that no electricity is sent back to the grid.
Embedded Network Management Card :
Allows you to remotely manage alert thresholds and monitor your UPS over EcoStruxure IT, Web, SNMP, or Modbus TCP and Modbus RTU.
Flexible DC bus :
Optimizes battery sizing and supports a wide range of energy storage technologies, including VRLA, Li-ion, and NiCd batteries.
Parallel-capacity capability :
Increases total power capacity by using multiple uninterruptible power supplies simultaneously.
Parallel-redundant capability :
Powers the connected equipment with multiple uninterruptible power supplies and redundant fan design to increase system redundancy.
Specifications APC Galaxy VS UPS – (GVSUPS80KHS)
Overview
Presentation: Highly efficient, easy-to-deploy 80kW, 400V 3-phase uninterruptible power supply (UPS) that brings best-in-class power protection to edge, small and medium data centers, as well as to critical infrastructure in commercial and industrial applications. Compact design, high-density technology and modular architecture keep total cost of ownership low and operational efficiency at the highest levels. Galaxy VS reduces your energy losses by up to 66% with eConversion mode – reaching up to 99% efficiency levels and delivering more energy savings than even our industry-leading 97% efficiency in double conversion mode. The UPS is EcoStruxure connected to give you peace of mind with cloud-based remote monitoring and management via your smartphone. Includes 5×8 start-up service.
Lead time: Usually Ships within 2 Weeks
Main
Main Input Voltage: 400 V 3 phases
Other Input Voltage:
– 380 V
– 415 V
Main Output Voltage: 400 V 3 phases
Other Output Voltage:
– 380 V
– 415 V
Rated power in W: 80 kW
Rated power in VA: 80 kVA
Output connector type: Hard wire 5-wire (3P + N + E) 1
Battery type:
– External battery system
– Li-Ion (Lithium-Ion)
– VRLA
Provided equipment:
– Dust filter
– Installation guide
– – Integrated network management
– Power modules ship installed
– Start-up service
– Top and bottom cable entry
Batteries & Runtime
Efficiency: View Efficiency Graph
Battery voltage: 384…576 V DC
Discharge battery voltage: 307 V DC
Max current discharge: 217 A
Battery power in VAH: 0 VAh runtime
Extended runtime: 0
General
Bypass voltage tolerance: +/- 10 %
Max bypass input current: 129 A
Redundant: No
Physical
Colour: White
height: 148.5 cm
Width: 52.1 cm
Depth: 84.7 cm
Net weight: 250 kg
USB compatible: No
Input
Network frequency: 40…70 Hz
Number of input connectors:
– 1 hard wire 3-wire (3P + E)
– 1 hard wire 5-wire (3P + N + E)
Input voltage limits: 340…460 V 400 V
Maximum input current: 148 A
Max short time withstand current: 65 kA
Input harmonic distortion: Less than 3 % for full load
Load power factor: From 0.7 leading to 0.7 lagging without any derating
Input Power Factor at Full Load: 0.99
Output
Maximum configurable power in W: 80 kW
Harmonic distortion: Less than 3 %
Output frequency:
– 50 Hz sync to mains
– 60 Hz sync to mains
– 60 Hz +/- 0.1 % for 60 Hz nominal unsynchronised
– 50 Hz +/- 0.1 % for 50 Hz nominal unsynchronised
Crest factor: 2.5
Wave type: Sine wave
Output voltage tolerance: +/-1% after 50ms
Output harmonic distortion: < 1% linear load and < 3% non-linear load
Output overload operation: 10 minutes at 125% and 60 seconds at 150%
bypass type: Built-in static bypass
Maximum configurable power in VA: 80 kVA
Conformance
standards:
– CSA C22.2 No 107.3
– EN/IEC 62040-1
– EN/IEC 62040-2
– EN/IEC 62040-3
– FCC part 15 class A
– IEC 60721-4-2 level 2M2
– UL 1778 5th edition
Environmental
Ambient air temperature for operation: 0…40 °C
Relative humidity: 0…95 % non-condensing
Operating altitude: 0…3281 ft
Ambient air temperature for storage: -25…55 °C
Storage Relative Humidity: 10…80 % non-condensing
Storage altitude: 0.00…15240.00 m
Acoustic level: 65 dBA
Heat dissipation: 7449 Btu/h
IP degree of protection: IP21
Communications & Management
Free slots: 1
control panel: Touch screen LCD user interface
Packing Units
Unit Type of Package 1: PCE
Number of Units in Package 1: 1
Package 1 Height: 168 cm
Package 1 Width: 99 cm
Package 1 Length: 64 cm
Package 1 Weight: 275 kg
Contractual warranty
Warranty: 1 year on-site repair or replace with factory authorized Start-Up
