Daker DK Plus convertible UPS with battery – Single phase VFI – 2000 VA – 1800 W
#3 101 71
Product characteristics
PRODUCT DESCRIPTION
Convertible UPS with batteries Single phase
• The stated backup time in minutes is estimated and may vary according to the load characteristics, operating conditions and environment
• Nominal power: : 2000 VA
• Active power: : 1800 W
• Backup time: : 10 min
• Weight: : 29.5 kg
General characteristics
DAKER DK PLUS – On-line double conversion UPS (rack/tower) – single phase and three phase VFI
• The main parameters of the UPS, including the battery charge level and faults, are displayed on the LCD screen on the front panel
• The integrated communication software not only controls the UPS and its switch-off if there is a malfunction, and enables the user to test the main functions remotely, communicate via SNMP/Internet/network adaptor and access the functions of the UPS via the Internet, but can also send the user an SMS if specific events occur
• The internal extension connector enables aWEB/SNMP card or a relay interface to be installed which provides insulated contacts for applications on industrial control panels or remote alarm panels
• If there is an electronic fault, overload, overheating or for scheduled maintenance operations, the automatic or manual (optional) bypass ensures continuity of the power supply for critical loads. A bypass switch is available for maintenance
Spesifikasi Daker DK Plus convertible UPS (3 101 71)
General Features
– Nominal power (VA) : 2000
– Active power (W) : 1800
– Technology : On-Line Double Conversion VFI-SS-111
– Waveform : Sinusoidal
– UPS architecture : convertible tower and rack 19
– Surge Rating : 1530
– ECO Mode efficiency : %97,75
Input
– Input voltage : 230 V
– Input frequency : 50-60 Hz ±5% Autosensing
– Input Voltage Range : 180-300 on full load, 150-300 on 80%load, 110-300 on 60% load
– THD Input current < 3%
– Input power factor > 0.99
– Input Plug : 3 101 71: Multi Standard, 3 100 55: British Standard
Batteries
– Uptime Expansion : yes
– Number of batteries : 6
– Battery series Type/Voltage : 12V 7.2Ah
– Uptime with 80% load (min) : 10
– Recharge time (to 100%) : 4 hours
– Battery disconnector for safe transportation : yes
Communication and management
– Display and Signals : Four buttons and four LEDs to monitor the status of the UPS in real time
– Communication Ports : RS232 serial ports, USB
– Remote Management : available
– Network interface slot : SNMP
Mechanical features
– Measurements H x L x D (mm) : 440×88 (2U) x600
– Battery Cabinet Measurements H x L x D (mm) : 440×88 (2U) x600
– Net Weight (kg) : 29.5
Environmental conditions
– Operating temperature (°C) : 0 ÷ 40 °C
– Degree of protection : IP20
– Relative humidity (%) : 0-95% non-condensing
– Noise level at 1 m (dBA) : On-Line Mode < 50, Eco Mode < 40
– Heat Loss (BTU/h) : 654
Certifications
– Standards : EN 62040-1, EN 62040-2, EN 62040-3
