APC Easy UPS 1 Ph, 3kVA, Tower, 230V – (SMV3000AI)
Hubungi kami | 1-Phase | 3-Phase | Accessories | RBC
“APC Easy UPS 1 Ph Line Interactive, 3kVA, Tower, 230V, 6 IEC C13 outlets, AVR, LCD”
Features & Benefits
For our home and small office customers APC by Schneider Electric delivers a new category of UPSs designed for the essential power protection needs even in the most unstable power conditions, introducing APC Easy UPS. APC Easy UPS is a versatile UPS developed to handle inconsistent power conditions while also delivering the quality millions of professionals trust around the world.
“Benefits”
Availability
– Advanced Safety Features – Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
– Intelligent battery management – Maximizes battery performance, life, and reliability through intelligent, precision charging.
– Battery failure notification – Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Features
– Cold-start capable – Provides temporary battery power when the utility power is out.
– Boost Automatic Voltage Regulation (AVR) – Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
– Sleek design – Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
– Transformer-block spaced outlets – Protect equipment with input transformer blocks without blocking access to other receptacles.
Manageability
– LED Indicators – Provide easy-to-read status of the unit and utility power conditions.
– Audible alarms – Provides notification of changing utility power and UPS power conditions
Protection
– Battery backup and surge protection – Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage.
– Battery and surge protected outlets – Back up and protect your hardware and data during power outages, surges and spikes.
Safety
– Safety-agency approved – Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Specifications APC Easy UPS 1 Ph (SMV3000AI)
Overview
– Lead time : Usually in Stock
Main
– Run time for load 2100 W Min-max: 210-2100 W 2min 25s
– Max. Capacity Used : 100 %
– Main Input Voltage : 230 V
– Input voltage : 220 V, 240 V
– Main Output Voltage : 230 V
– rated power in W : 2100 W
– Rated power in VA : 3000 VA
– Input Connection Type : IEC 60320 C20
– output connection type : 6 IEC 60320 C13
– Number of cables : 1
– Battery type : Lead-acid battery
– Provided equipment : Documentation CD, User manual, USB cable
Batteries & Runtime
– Run Time : View Runtime Graph
– Efficiency : View Efficiency Graph
– Number of battery filled slots : 0
– Number of battery free slots : 0
– Battery recharge time : 4 h
– Battery voltage : 48 V
– Battery charger power : 99 W rated
– Battery life : 3…5 year(s)
– Replacement battery : APCRBCV209
– Extended runtime : 0
General
– Number of power module free slots : 0
– Number of power module filled slots : 0
– Redundant : No
– UPS size : WS
Physical
– Colour : Black
– Height : 24 cm
– Width ; 18 cm
– Depth : 45.5 cm
– Product weight : 25.2 kg
– Mounting preference : No preference
– Mounting mode : Not rack-mountable
– Two post mountable : 0
– USB compatible : No
Input
– Network frequency : 45…65 Hz +/- 1 Hz auto-sensing
– Input voltage limits : 165…295 V
Output
– Maximum configurable power in W : 2100 W
– Output frequency : 50/60 Hz +/- 1 Hz unsynchronised
– Crest factor : 3 : 1
– UPS type : Line interactive
– Wave type : Sine wave
– Graph display : 1
– Maximum configurable power in VA : 3000 VA
– Transfer time : 2-6 ms typical : 12 ms maximum
Conformance
– Product certifications : CE, UKCA
– Standards :
EN/IEC 62040-1:2019/A11:2021
EN/IEC 62040-2:2006/AC:2006
EN/IEC 62040-2:2018
Environmental
– Ambient air temperature for operation : 0…40 °C
– Relative humidity : 0…95 % non-condensing
– Operating altitude : 0…3000 m
– Ambient air temperature for storage : -10…40 °C
– Storage Relative Humidity : 0…95 % non-condensing
– Storage altitude : 0…15000 m
– Acoustic level : 45 dBA
– IP degree of protection : IP20
Communications & Management
– Alarm : Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Surge Protection and Filtering
– Surge energy rate : 125 J
Packing Units
– Unit Type of Package 1 : PCE
– Number of Units in Package 1 : 1
– Package 1 Height : 41.05 cm
– Package 1 Width : 31.9 cm
– Package 1 Length : 60.1 cm
– Package 1 Weight : 28.9 kg
Contractual warranty
– Warranty : 2 years repair or replace
