APC Smart-UPS VT 15kVA 400V w/3 Batt Mod Exp to 4, Start-Up 5X8, Int Maint Bypass, Parallel Capable – SUVTP15KH3B4S
APC Smart-UPS VT 15kVA 400V w/3 Batt Mod Exp to 4, Start-Up 5X8, Int Maint Bypass, Parallel Capable
Includes: Battery modules ship installed , Bolt Down Brackets , CD with software , Installation Guide , Network Management Card , Power modules ship installed , Start up included , User Manual
SUVTP15KH3B4S Features
APC Smart-UPS VT 15kVA 400V w/3 Batt Mod Exp to 4, Start-Up 5X8, Int Maint Bypass, Parallel Capable
Parallel-capacity capable
Increases total power capacity by using multiple uninterruptible power supplies simultaneously.
Parallel-redundant capable
Power the connected equipment with multiple uninterruptible power supplies to increase system redundancy
Smart-UPS VT Features & Benefits
Manageability
LED status indicators
Quickly understand unit and power status with visual indicators.
SmartSlot
Customize UPS capabilities with management cards.
Network manageable
Provides remote power management of the UPS over the network.
LCD display
Alpha-Numeric Display which displays system parameters and alarms.
InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.
Programmable frequency
Ensures compatibility with different input frequencies.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Serviceability
Modular design
Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.
Shippable with modules installed
Enables pre-installation UPS staging and testing and faster installation.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery replacement without tools
Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
Availability
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.
Dual mains input
Increases availability by allowing the UPS to be connected to two separate power sources.
Scalable runtime
Allows additional run time to be quickly added as needed.
Battery modules connected in parallel
Delivers higher availability through redundant batteries.
Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Total Cost of Ownership
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Manual maintenance bypass
Reduces installation costs by eliminating the need for an external mechanical bypass.
Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Protection
Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Cold-start capable
Provides temporary battery power when the utility power is out.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Marketing Features
Manual maintenance bypass
Reduces installation costs by eliminating the need for an external mechanical bypass.
Scalable runtime
Allows additional run time to be quickly added as needed.
Dual mains input
Increases availability by allowing the UPS to be connected to two separate power sources.
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Network manageable
Provides remote power management of the UPS over the network.
Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
Specifications APC Smart-UPS VT 15kVA 400V – SUVTP15KH3B4S
Output
Output power capacity
12.0 KWatts / 15.0 kVA
Max Configurable Power (Watts)
12.0 KWatts / 15.0 kVA
Nominal Output Voltage
400V 3PH
Output Voltage Note
Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage
Efficiency at Full Load
95.7 %
Output Voltage Distortion
Less than 5% at full load
Output Frequency (sync to mains)
47 – 53 Hz for 50 Hz nominal
Output Frequency (not synced)
50Hz +/- 0.1% for 50Hz nominal
Other Output Voltages
380, 415
Load Crest Factor
3 : 1
Topology
Double Conversion Online
Waveform type
Sine wave
Maximum Output Current
24
Output Connections
(1) Hard Wire 5-wire (3PH + N + G) (Battery Backup)
(1) Screw Terminals (Battery Backup)
(1) Hard Wire 4-wire (3PH + G) (Battery Backup)
Bypass
Built-in Maintenance Bypass, Built-in Static Bypass
Input
Nominal Input Voltage
400V 3PH
Input frequency
40 – 70 Hz (auto sensing)
Input Connections
Hard Wire 5-wire (3PH + N + G)
Input voltage range for main operations
304 – 477 V
Efficiency at Full Load
95.7 %
Other Input Voltages
380, 415
Maximum Input Current
21.0 A
Input Power Factor at Full Load
0.98
Batteries & Runtime
Battery type
VRLA
Included Battery Modules
3
Typical recharge time
5 hour(s)
Nominal Battery Voltage
+/-192 V (split battery referenced to neutral)
Battery Slots Empty
1
RBC Quantity
3
Extendable Run Time
1
Battery Volt-Amp-Hour Capacity
7424
Extended Run Options
APC-Smart-UPS-VT-15kVA-400V-w-3-Batt-Mod-Exp-to-4-Start-Up-5X8-Int-Maint-Bypass-Parallel-Capable
End of Discharge Battery Voltage
+/-154 V
Communications & Management
Interface Port(s)
DB-9 RS-232 , Smart-Slot
Pre-Installed SmartSlot™ Cards
AP9631
Control panel
Multi-function LCD status and control console
Audible Alarm
Audible and visible alarms prioritized by severity
Emergency Power Off (EPO)
Yes
Physical
Maximum Height
1499 , 149.9 cm
Maximum Width
559 , 55.9 cm
Maximum Depth
813 , 81.3 cm
Net Weight
506.82 kg
Shipping weight
537.73 kg
Shipping Height
1643 , 164.3 cm
Shipping Width
650 , 65.0 cm
Shipping Depth
1062 , 106.2 cm
Color
Black
Units per Pallet
1.0
Environmental
Operating Environment
0 – 40 °C
Operating Relative Humidity
0 – 95 %
Operating Elevation
0-999.9 meters
Storage Temperature
-50 – 40 °C
Storage Relative Humidity
0 – 95 %
Storage Elevation
0-15000 meters
Audible noise at 1 meter from surface of unit
64.0 dBA
Online thermal dissipation
2170.0 BTU/hr
Protection Class
IP 20
Conformance
Approvals
C-tick, CE, EN 50091-2, EN/IEC 62040-3, IEC 61000-3-2, IEC 61000-3-3, ISO 14001, ISO 9001, VFI-SS-111
Standard warranty
1 year repair or replace, Start-Up Service
Kata Kunci Terkait :
APC Smart-UPS VT 15kVA 400V – SUVTP15KH3B4S, jual APC SUVTP15KH3B4S, harga APC SUVTP15KH3B4S, spesifikasi APC SUVTP15KH3B4S, beli APC SUVTP15KH3B4S, instalasi APC SUVTP15KH3B4S, sewa APC SUVTP15KH3B4S,
